Blyss BLY1 Spécifications télécharger pdf (Page 20)

Using the System/

Maintenance/

Extending the System

BLY1 Wireless Alarm System

In more detail...

Maintenance

Once every 3 months:

Test all detectors.

Additionally, once every two years:

It is suggested to replace all batteries in wireless detectors and the control unit.

Replace with the same type of battery:

PIR Detector: 2 x AAA 1.5V Alkaline batteries

Magnetic Contact Detector: 2 x AAA 1.5V Alkaline batteries

Remote Control (optional accessory): 1 x CR2032 Lithium coin cell

Siren: 4 x D cell Alkaline batteries

Control Unit: 9V PP3 Alkaline battery

When replacing any batteries, ensure the control unit is powered OFF completely.

Extending the system

A number of accessories are available to extend your system to suit your exact requirements.

When extending the system, please note the system can take up to 4 wireless magnetic Door/

Window contact detectors (in zones1-4), 4 PIR Detectors (in zones 5-8) and up to 3 wireless

remote controls.

Standard remote control (BLY4) – can be used to arm, part-arm, disarm or panic the control

unit system with an operating range of about 60 meters in open eld conditions. Please contact

your supplier for more information.

Standard PIR (BLY3) – easy to install, one unit protects a large area.

Standard Door/Window contact (BLY2) – easy to t, detects opening of a door or window, can

be extended by the addition of wired magnetic contact.

Default settings

Parameter Ex-factory Value

User PIN code 1234

Entry/Exit delay 30 seconds

Siren Duration 3 minutes

Zone allocation for PIR and MC Detectors

Zone 1 to 4 Magnetic Contact

Zone 5 to 8 PIRs

REMARK: It is recommended to replace the 9V alkaline battery in the control unit

after the AC power is out of service for a period of times.

Wireless Alarm System.indd 20 01/06/2012 10:57

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26

Pas de commentaire

Blyss BLY1 Spécifications Page 20